Sentry US ACSK-EM Manual de usuario descargar pdf (Pagina 8)

The Factory Default Programming/Admin Code is 1 2 3 4.

To enter Setup Mode press Programming Code twice.

(ex: 1 2 3 4 1 2 3 4) The mode LED indicator will turn yellow.

To exit or quit from the Setup Mode, press # key.

CHANGING PROGRAMMING/ADMIN CODE

1. In Setup Mode, press * key and 3. The mode indictor will flash yellow.

2. Enter new Programming Code twice (ex: 5 6 7 8 5 6 7 8). A long beep means

Programming Code was changed. The length of the Programming/Admin Code must

be the same as the old one.

3. Exit Setup Mode.

RESTORING THE PROGRAMMING/ADMIN CODE TO FACTORY DEFAULT

*Only if you cannot remember your new Programming Code.

1. Turn off control keypad power.

2. While pressing # key, turn on the power of the control keypad. A long beeps means

the default Programming Code was restored. (Programming/Admin Code is 1 2 3 4)

3. Exit Setup Mode.

ACCESS MODE SETTING

Card Access Only:

1. In Setup Mode, press * key and 0. The mode LED indicator will flash yellow.

2. Press 0 twice. The mode LED indicator will turn yellow and a long beep will sound.

Card & Code Access:

1. In Setup Mode, press * key and 0. The mode LED indicator will flash yellow.

2. Press 0 and 1. The mode LED indicator will turn yellow and a long beep will sound.

Combined Access:

1. In Setup Mode, press * key and 0. The mode LED indicator will flash yellow.

2. Press 0 and 2. The mode LED indicator will turn yellow and a long beep will sound.

To exit or quit from Setup Mode, press # key.

LENGTH OF PASSWORD SETTING

1. In Setup Mode, press * key and 9. The mode LED indicator will flash yellow.

2. Press 0 and 4. When a “BI” sound beeps, enter X (X = 2 / 3 / 4 / 5 / 6).

Note: 2 = length of 2 digits (00-99)

3 = length of 3 digits (000-999)

4 = length of 4 digits (0000-9999)

5 = length of 5 digits (00000-99999)

6 = length of 6 digits (000000-999999)

A “BI” sound means digit length setting is successful. A “BI BI BI” sounds means digit length is

the same as the existing, so setting is not permitted.

To exit or quit from Setup Mode, press # key.

IMPORTANT NOTE: In case the digit length changed, all added cards and passwords will be

cleared.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Sentry US ACSK-EM Manual de usuario Pagina 8