Sentry US shdvr-08 Instrucciones de operaciones

INSTALLATIONC2676M-A (8/09)DX4500/DX4600Digital Video RecorderHard Disk Drive

10 C2676M-A (8/09)REMOVING THE HDDNOTE: It is recommended that you do not remove previously installed drives. If you must remove a drive for any reaso

C2676M-A (8/09) 11REINSTALLING THE MOUNTING BASKET1. Reinstall the HDD mounting basket (refer to Figure 9):a. Gently lower the basket into place. Be c

12 C2676M-A (8/09)Reassembling the Unit1. Replace the chassis cover using the screws you removed (refer to Figure 11).Figure 11. Replacing the Chassis

C2676M-A (8/09) 13FormattingThe DX4500/DX4600 automatically detects when a new drive is installed or when a current drive is switched to a different S

14 C2676M-A (8/09)REVISION HISTORYManual # Date CommentsC2676M 9/07 Original version.C2676M-A 8/09 Updated the ESD section and reorganized the manual

PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material or workmansh

Pelco, Inc. Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USAUSA & Canada Tel (800) 289-9100 Fax (800) 289-9150Internatio

2 C2676M-A (8/09)ContentsImportant Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C2676M-A (8/09) 3Important Safety InstructionsBe sure to read familiarize manual and all safety instructions and before proceeding with the HDD instal

4 C2676M-A (8/09)DescriptionThis manual describes how to replace, upgrade, or install a new hard disk drive (HDD) in the DX4500/DX4600 Series digital

C2676M-A (8/09) 5If you reinstall the HDD in a different location, the “New hard disk drive found” dialog box opens when the unit is restarted. It ask

6 C2676M-A (8/09)Installing a Hard Disk DriveNOTE: The security surveillance service provided by the DX4500/DX4600 is interrupted when the unit is tak

C2676M-A (8/09) 7OPENING THE CHASSIS1. Make sure you protect the unit and its components, which are susceptible to damage from improper handling and E

8 C2676M-A (8/09)INTERIOR COMPONENT LAYOUTRefer to Figure 4 for information about the DX4500/DX4600 layout of major components.Figure 4. Layout of Maj

C2676M-A (8/09) 9REMOVING THE MOUNTING BASKET1. If HDD drives are already installed, disconnect the SATA HDD power connector and data cable (refer to